Karoo 2 - Smart Light Integration

Your Karoo 2 can connect with ANT+™ Smart lights.

The Karoo 2 only controls your smart light at the start and end of each ride. This means that you can still change your light’s setting while you’re riding by pressing its hardware buttons. It also means that your light will remain on, in its current setting, if the Karoo disconnects from it mid-ride. The ANT+ smart lights will turn off when you end the ride on your Karoo 2.

Note: If you have a Varia Radar with an inbuilt taillight, you would have to pair both sensors individually. See: Varia Radar integration 

Here are the steps to pair an ANT+ Smart Light with your Karoo 2:

• On the Home screen, click on the "Apps" button.
  
• Click on the "Sensors" app.
• Toggle the ANT+ button.
• Tap on the"﹢" button to start the search.
• Once the ANT+ Smart Lights are listed, select the ones that you want to pair with.
• Tap on the"✓" button to confirm pairing.
• The chosen lights will now be paired.

You can configure which of your lights’ supported modes
are preferred for each light under its sensor details. 

The connected ANT+ smart lights will now turn on to the saved mode
when you start a ride on your Karoo 2.

Each connected Smart Light gets its own page under the Control Center
for you to change the light mode during a ride.

You can tap directly on the name of the desired light mode, swipe the slider to the proper position, or use the hardware buttons to select the mode you need.