Karoo 2: Speed via GPS 0.0 + map

Answered

Follow

Slawomir Romanowski

• March 21, 2021 23:48
• Edited

Hi,

Finally, I was able to get my bike out with Karoo 2 and take a ride. The first ride to test Karoo and a nasty surprise.
I installed a Speed ​​/ Cadance sensor, all in one, but I wanted to use only Candence so installed only one magnet, for Candence, the speed I wanted it to be calculated by GPS.

Ride 1:
On Karoo 2, I have chosen Cadence + HR. The cadence worked fine, but the speed not at all. During my outing the speed was running 2-3 times and for no longer than 10 seconds.

Ride 2
Again same mode, Cadence + HR, no speed the whole trip - 0.0. Also, another problem during this ride.
During my way back home, still Cadence + HR, some streets were like black boxes and after maybe 1 min or less, Karoo would go back to the main screen. I tried several times but Karoo couldn't stay in Cadence + HR mode.
I switched to No sensors and this time the map was correct, no black boxes, but still no speed: 0.0

What can I do?

ps

Karoo version is latest upgrade: 1.189.994.12

Thank you

1

• 

  Mark Myszkewicz

  • March 23, 2021 14:50

  Try moving the built-in GPS above your speed sensor in the sensors list. It should still get cadence data, but should use GPS for speed.

  0

  Comment actions Permalink
• 

  Slawomir Romanowski

  • March 23, 2021 14:55

  Thank you, I'll try this tomorrow.

  Dzieki

  0

  Comment actions Permalink
• 

  Slawomir Romanowski

  • March 26, 2021 15:23

  The speed worked but there are still black boxes on the map (Cadence + HR). Karoo in Cadence + HR mode, was not able to stay in this mode and returned to the main screen. In No Sensor mode, everything was fine.

  After I got back to home, I saw that there is an update which I applied. Now I need to test everything again.

   

  0

  Comment actions Permalink

Please sign in to leave a comment.