DI2 - difficult to connect

Answered

Follow

Maciej Kujawa

• June 23, 2021 11:43
• Edited

Hello

Anyone having difficulty to connect to DI2 D-Fly?
Latest K2 FW and latest DI2 FW. I always have to go out of ride data screen, go back to Sensors and try to reconnect. Sometimes multiple times. Once connected it's rock solid.

Other sensors - Assioma PM, Garmin speed sensor etc. work without problems - only DI2 must be reconnected from Sensors page.

1

• 

  Edgar Karel

  • June 23, 2021 17:52

  Yes, same here. Connecting Di2 takes much longer after firmware update 3 weeks ago.

  1

  Comment actions Permalink
• 

  Akhil

  • June 23, 2021 20:18

  Hey All, 

   I would urge you to move the Di2 to the top of your sensor precedence list & also try to connect the Di2 as the first sensor to the Karoo before connecting the others before your next ride. Do let me know if this workaround helps? 

  0

  Comment actions Permalink
• 

  Maciej Kujawa

  • June 23, 2021 21:09

  Hi Akhil. Of course I will try that, but don't you think it should just connect without such steps? Many of us just roll the bike from the basement or the garage and naturally the first sensor to connect would be the speed sensor - just forgetting to move the derailleurs with the buttons. As mentioned by Edgar - it just got worse with subsequent FW updates. Anyway - thank you for the suggestion.

  1

  Comment actions Permalink
• 

  Maciej Kujawa

  • June 24, 2021 11:39

  Tried all the suggested moves. Sometimes it helps switching off/on sensors but in general all remains the same - must go to Sensors page to manually rescan DI2 connection. Everything is connected (Assioma PM/cadence, HR, Speed) but not DI2.

  1

  Comment actions Permalink
• 

  Nicholas Taylor

  • June 24, 2021 14:24

  I've had this for a few weeks.  I've tried all the suggestions by Karoo and it's still not working well.  It's really hit and miss when it connects.  Removing all sensors, adding it first then putting at the top does help but agree it should just work.

  1

  Comment actions Permalink
• 

  Howie Nordström

  • June 26, 2021 08:30

  I'm having the same issue. Connection issues also include my power meter, Assioma Duo. My Polar 10 HRM and Garmin Vario 2 are picked up immediately, but not Di2 or the Assioma (also using ANT+).

  2

  Comment actions Permalink
• 

  Howie Nordström

  • July 12, 2021 07:52

  Update: A recent FW update appears to have improved connection ability/time for the Assioma power meter. However, it's killed the connection of the Vario 2 during a ride. I have to quit the ride, go back to settings, turn off the Vario and then turn on the Vario for it to be discovered by Karoo 2. 

  0

  Comment actions Permalink

Please sign in to leave a comment.