Last firmware problems Karoo 2 - autopause and speed

Completed

Follow

Gabriele Stagni

• August 14, 2022 16:07

Since I installed the latest firmaware, the autopause does not stop working and the ride is not registered. Even the speed is not detected but the gps is active and works, if I check the map the ride is correctly tracked. If I stop manually autopause Karoo2 record the ride but the speed is not detected and not even recorded.

0

• Official comment

  

  Shruti

  • September 09, 2022 17:10

  Hi All,

  We are reaching out to let you know that we’ve introduced the ability to select the data you want your combined speed/cadence sensor to provide (speed, cadence, or both). This is particularly useful if you only want your combined speed/cadence sensor to provide cadence on outdoor rides. Go to the sensor’s Details page on Karoo to configure this setting for each of your combined speed/cadence sensors. 

  Help Article for your reference: https://support.hammerhead.io/hc/en-us/articles/8718666247195

  Thank you!

  Comment actions Permalink
• 

  Steve Jensen

  • August 15, 2022 22:49

  I am pretty sure this is due to: 1.320.1298 update the removal of the "Built-in GPS" – Hammerhead. I noticed the same behavior with regards to auto-pause and speed. In my case, I had to disable a conflicting sensor for the time-being until this issue is fixed. You can probably do something similar. Check your sensor list and see if you have one labeled speed. If you do that is now taking the place of the GPS speed sensor for outside profiles, which is not what you intended. You can disable that sensor and see if the speed and auto-pause functions work normally again. I think they will. But, you will lose whatever function you were getting from the conflicting sensor. In my case, it was cadence information.

  0

  Comment actions Permalink
• 

  Michael Kennedy

  • August 22, 2022 08:41

  this is also mentioned, just closing the loop, in General for the pinned topic -
  https://support.hammerhead.io/hc/en-us/community/posts/360044025794-Known-Bugs-and-Issues

  0

  Comment actions Permalink

Please sign in to leave a comment.